Martin Engineering’s secondary cleaners are installed at the point where the belt leaves the discharge pulley to remove any residual amounts of material that the primary cleaner left on the belt. Typically, a secondary cleaner is installed against a roller close enough to the primary cleaner that the material is returned to the main material stream. Additional secondary cleaners can be added for final cleaning.
Filter By
| Image | Product | Max Belt Speed | Max Belt Width |
|---|---|---|---|
 |
CleanScrape® Secondary Cleaners | 900 fpm (4.6 m/s) | Up to 96 in (up to 2400 mm) |
 |
SQC2S™ Cleaner | 1000 fpm (5.1 m/s) | Up to 96 in (up to 2400 mm) |
 |
SQC2S™ Reduced Mini Cleaner | 750 fpm (3.8 m/s) | Up to 72 in (up to 1829 mm) |
 |
SQC2S™ Cleaner STS | 1000 fpm (5.1 m/s) | Up to 96 in (up to 2400 mm) |
 |
DT2S Reversing Cleaner | 900 fpm (4.6 m/s) | Up to 120 in (up to 3048 mm) |
 |
DT2H Reversing Cleaner XHD | 1200 fpm (6.1 m/s) | Up to 126 in (up to 3200 mm) |
 |
Durt Hawg® DH2 Cleaner | 750 fpm (3.8 m/s) | Up to 96 in (up to 2400 mm) |
